Ford recalling 128k Fusion, Milan models for wheels falling off
The National Highway Traffic Safety Administration has announced that Ford Motor Company will recall select Ford Fusion and Mercury Milan sedans from the 2010 and 2011 model years, with 128,616 vehicles included. These vehicles are equipped with a 17” steel wheel design that may cause excessive force on the studs that hold the wheel onto the car and over time; that force can cause the wheel studs to break. Once one of these studs breaks, the pressure on the others is increased which can cause the rest of them to break over time. If this problem is left unattended, a wheel could come free of the vehicle while the car is in motion – very clearly presenting a serious risk to the occupants of the troublesome Fusion and Milan sedans but also those on the road around them.
The route of the problem causing Ford to recall the 128k+ 2010 and 2011 Fusion and Milan sedans is the mounting pad on the rear of the steel wheel, which Ford believes are “faulty”. Ford also believes that on some of these recalled Fusion and Milan models, the rear wheel mounting surface may not have been properly assembled when, combined with the problematic steel wheel construction, can increase the likelihood of a wheel separation while driving.
The NHTSA first opened an investigation into the issue with 2010 and 2011 Ford Fusion and Mercury Milan sedans in January 2011, after receiving a handful of complaints about failing wheel studs. Overall, the NHTSA has received 29 complaints relating to this problem and in six cases, a wheel has come off of one of these cars while driving. Five of those reported cases saw a rear wheel separate from the vehicle while the other one saw a front wheel removed – with the front wheel being the much more severe issue as it would become very difficult to control the vehicle when losing one of the wheels that steers the car. The good news is that in these incidents, there have been no injuries.
It should be pointed out that condition explained in this Fusion and Milan recall notice is the type of issue that a driver/vehicle owner should be able to recognize on his or her own. In my years of working with automobiles, I have seen a variety of vehicles break wheel studs but it never happened all at once with the exception of a very high speed accident or a drag car with 1,000+ horsepower. Owners of these models should take a look at all four wheels, just to make sure that all of the studs still appear to be in place. It is very hard for the average Joe Carowner to be able to see if the wheel is mounting correctly or if the studs are cracking – but if they are missing, anyone fit to drive should be able to see that and know that something is wrong.
Ford will begin contacting the owners of the 128,616 affected Ford Fusion and Mercury Milan sedans in January, at which point owners will be asked to return to their local dealerships where the wheel studs will be replaced on all four wheels. The dealership with also inspect the mounting surface of the 17” steel wheels and the rear braking assembly to ensure proper mounting and mounting capabilities. In short, the mechanic will look over the whole wheel assembly to make sure that the wheel studs won’t break…so the wheels won’t fall off.
(Note: the car in the image on the right would not be included in this Fusion recall, as it does not have steel wheels – it is just a nice looking picture of the car courtesy of Ford.)
Chrysler leads the US industry in sales growth in November 2011
Ford Racing brings out the 2013 Mustang Cobra Jet racer to PRI
Ford unveils the 2013 Mustang Boss 302SX Concept at PRI
Gotta Have It Green debuts on the 2013 Ford Mustang GT at PRI
The 2013 Ford Mustang Boss 302 to debut at the 2011 LA Auto Show
The 2013 Ford Mustang gets a new look, the 2013 Mustang GT gets more power
Details of 2013 Ford Shelby GT500 - World's Most Powerful Production V8